Please read these terms carefully before using this Site. By using this Site or downloading information from it, you agree to abide by these Terms and Conditions. This is the official Site of MacDermid Autotype Ltd and its subsidiaries.
For our general Terms and Conditions of Business please see below.
Use of Site
MacDermid Autotype Limited allows you to view and download material from this Web Site ("Site") exclusively for your own personal, non-commercial use. This is not a Transfer of Title of the materials accessed or downloaded and is subject to the following restrictions:
1. You must retain on all copies of the material all copyright and proprietary notices contained therein.
2. You may not modify, distribute in any way (including dissemination through a networked computer environment), display, reproduce or perform or use any of the material for commercial or other public purpose
3. You must not transfer any of the material to a third party unless notice is given of these Terms and Conditions and these are accepted.
You agree to abide by any restrictions that may be displayed on this Site as it is updated from time to time.
This Site is protected by copyright and unauthorised use of any of the material may violate copyright or trademark laws. Breaching these terms will automatically terminate the authorisation to use this Site and you must destroy forthwith any downloaded or printed material. Except as expressly provided herein, MacDermid Autotype Limited does not grant you any express or implied right to trademarks, patents, copyrights or trade secrets.
MacDermid Autotype Limited reserves the right to terminate your authorisation to use any services at the Site and to delete your account, with or without cause, immediately and at any time.
Disclaimer
This Site contains a large amount of complex information. We have tried to make it as easy, clear and accurate as possible. However, the materials provided within this Site are supplied without warranties that this Site is accurate, complete or up to date. We will have no liability to you if it is not. Information published in this Site may refer to products that may not be available in your country. It is your responsibility to consult our authorised distributor in your country for any information or product or services available to you. We will have no liability for interruption of service to this Site. We reserve the right to change any of the material contained in the Site at any time and without notice.
User bulletin boards and chat areas
MacDermid Autotype Limited may, but are not obliged to, monitor areas of the Site where users post, transmit or communicate with other users, such as bulletin boards, forums, on-line conferences or product ratings. MacDermid Autotype Limited will have no liability related to the content of any such material posted by third parties and MacDermid Autotype Limited retains the right to remove messages which may be deemed defamatory, abusive, obscene or otherwise unacceptable.
User submission
Any material posted by you that is not personally identifiable (and therefore not covered by the Privacy Statement) will be considered non-proprietary. You are prohibited from attempting to interfere with the functions of this Site and from posting, transmitting to or from this Site any unlawful, threatening, libellous, obscene, defamatory, pornographic or other material that would violate any law.
Third party links
Links to third party web site are provided entirely as a convenience to you. On accessing third party links you will leave this Site and will continue at your own risk. MacDermid Autotype Limited has not reviewed third party links and we are not in any way responsible for the contents of third party sites, nor endorse any of the products or services found there or any subsequent result that may be obtained from using them.
Limitation of liability
In no event shall MacDermid Autotype Limited or any of its subsidiaries be liable to any entity for any direct or indirect damages that are related to the use of, or inability to use, the contents, materials and functions of the Site or any linked website.
Applicable law
The Site and its contents are regulated by English Law. Any dispute arising from this Site shall be resolved by the English Courts.
The site is maintained by MacDermid Autotype Limited, Grove Road, Wantage, OX12 7BZ. MacDermid Autotype Limited Registered in England and Wales Company No.192795 - VAT No. GB226835355.
GENERAL TERMS OF CONDITIONS OF BUSINESS
1.Definitions
In these conditions:
(a) the "Seller" means MacDermid Autotype Limited;
(b) the "Buyer" means the person, firm or company who places an order with the Seller for the purchase and/or supply of any Goods or service;
(c) the "Goods" means the products or services supplied by the Seller which are the subject of an order placed by the Buyer with the Seller.
2. Contractual Terms
(a) These conditions shall apply to all contracts for the sale of Goods entered into by the Seller to the exclusion of the terms and conditions of the Buyer.
(b) All drawings, illustrations, performance data and other details in the Seller's catalogues, sales or promotional literature or elsewhere are included as a guide only, and whilst such details are printed in good faith they shall not bind the Seller. The Seller reserves the right to change specifications without prior notice at its absolute discretion.
(c) No variation, cancellation or waiver of these conditions shall be of any effect unless made in writing signed by a duly authorised officer of the Seller and the Buyer.
(d) Typographical or clerical errors or omissions shall be subject to correction.
(e) The Buyer must notify the Seller within seven days of the date of the Seller's acceptance or acknowledgement of order if such acceptance or acknowledgement does not accurately confirm the Buyer's order failing which the Buyer shall be bound by the terms of the acknowledgement.
The information and recommendations in this publication are believed to be accurate and are offered in good faith but do not constitute specifications. Suggestions concerning uses and applications are only the opinion of MacDermid Autotype Limited and users should carry out their own testing procedures to confirm suitability for their purposes. Except in the case of death or personal injury caused by the materials, MacDermid Autotype Limited MAKES NO WARRANTY OF ANY KIND AND EXCLUDES ANY STATUTORY WARRANTY EXPRESS OR IMPLIED other than that materials conform to their current applicable standard specification. Statements herein therefore should not be construed as guarantees of satisfactory quality or fitness for purpose. The responsibility of MacDermid Autotype Limited for claims arising out of breach of guarantee, negligence, strict liability or otherwise is limited to the purchase price of the material.
Suggestions concerning working practices and procedures are based on the practices adopted by existing users of the products and are made in good faith. IT IS THE RESPONSIBILITY OF THE USER TO ENSURE THAT ALL RELEVANT HEALTH AND SAFETY LAWS AND REGULATIONS ARE COMPLIED WITH. MacDermid Autotype Limited does not provide any advice on such laws and regulations and accepts no responsibility, express or implied, for breach of such regulations.
3. Creation of Contractual Relations
Unless previously withdrawn the Seller's quotations and tenders shall remain valid for the period stated therein or if no period is stated for 30 days from the date of the quotation or tender. The Seller's offers, estimates, quotations, tenders, and price lists are invitations to treat only. All orders, must be in writing and must be accompanied by sufficient information to enable the Seller to proceed without delay with the execution of the order. All orders require the Seller's acceptance in writing in order to create a contract. Any such acceptance will nevertheless be subject to the Buyer's credit being approved and to cancellation without liability at the instance of the Seller should the Seller subsequently determine that, in its opinion the Buyer's credit worthiness is inadequate.
4. Prices
(a) All prices include only such Goods and accessories as are specified in the quotation and are for the quantities therein expressed. If the Buyer shall request any variation in quantity the price may be varied accordingly.
(b) Unless otherwise specified prices quoted do not include Value Added Tax which will be added at the rate prevailing at the appropriate tax point.
(c) Unless otherwise specified prices quoted do not include carriage which will be charged at extra cost. Where the quoted prices do include carriage the Seller shall determine the route and method of carriage and any special requirements of the Buyer shall be subject to an additional charge.
(d) Unless otherwise specified prices quoted include the Seller's and/or its suppliers' standard non-returnable packaging.
It is the Buyer's responsibility to dispose of all packaging after delivery.
(e) At any time before delivery has been completed the Seller shall be entitled to vary the price of the Goods to take into account all or any of the following factors:
(i) where Goods are imported any variation of currency exchange rate or special taxes or charges imposed by any government;
(ii) increased costs resulting from the prohibition or other actions of any government;
(iii) increased transport costs (if carriage is included in the quoted price);
(iv) implementing any request by the Buyer for expedited despatch or changes in delivery, schedules, completion dates, quantities, designs or specifications.
(v) delays caused by instructions of the Buyer or by failure of the Buyer to give adequate instructions or information.
5. Payment
Payment shall be made strictly to the terms specified and in the currency stated on the invoice. In default of payment on the due date specified in the invoice the Company without prejudice to its rights hereunder may charge the Buyer interest on overdue accounts at the rate of 3% over the National Westminster Bank PLC base rate for the time being. The Seller shall at its discretion (without prejudice to its right to treat the Contract as repudiated and claim damages) be entitled to withhold despatch of the Goods or any of them until all monies owing to the Seller by the Buyer have been paid in full.
6. Property and Risk
(a) Until payment in full for all the Goods delivered (including any charges or interest due under Clauses 4 or 5 of these conditions) has been received by the Seller or until such time as the Buyer sells the Goods by way of a bona fide sale at full market value:
(i) ownership of the Goods shall remain with the Seller;
(ii) the Seller reserves the right to dispose of the Goods, and the Seller shall be permitted to enter upon the Buyer's premises at all reasonable times to recover the Goods for this purpose;
(iii) The Buyer shall store the Goods so that they may be readily identified as the property of the Seller and during such time the Buyer shall ensure that the Goods
are kept and maintained in the condition in which they were delivered.
(b) The risk in the Goods shall, subject to Clause 8(b), pass to the Buyer on delivery to the Buyer or the Buyer's carrier.
7. Delivery
(a) The period quoted for delivery commences from the date of order acknowledgement but is an estimate only, and the time of delivery shall not be of the essence of the contract. Whilst the Seller shall use reasonable commercial endeavours to deliver the Goods by the date (if any) specified on the order acknowledgement it shall not be liable in any way for delay in delivery from any cause whatsoever and howsoever arising nor shall such delay entitle the Buyer to reject the Goods or treat the contract as repudiated or render the Seller liable for damages in any way.
(b) The Seller shall have the right to despatch any portion(s) of the Goods covered by the contract separately and to invoice the Buyer for such portion(s) so despatched on the same terms and conditions as are contained herein.
(c) It is the Buyer's duty to inform the Seller of the detailed delivery requirements in advance and to provide due warning and notice of any changes in such requirements.
8. Non-acceptance by Buyer
(a) If by reason of the Buyer's default the Goods or any of them have not been taken up or delivered by any date specified for such taking up or delivery, then:
(i) the Buyer shall nevertheless pay the Seller in accordance with Clause 5 of these conditions as if such taking up or delivery had occurred; and
(ii) the Buyer shall pay the Seller a storage charge in respect of any of the Goods which have not been taken up or delivered together with the cost of any additional handling and transport incurred. In the event that such storage by the Seller shall continue to a period exceeding six weeks the Seller may (without prejudice to any other rights which may have accrued) treat the contract as repudiated;
(b) During the period of any storage of the Goods or any of them by the Seller as contemplated by sub-clause 8(a)(ii) above such Goods shall be at the risk of the Buyer.
9. Loss or damage in transit and Non-delivery of Goods
No responsibility will be accepted by the Seller for any shortage, non-delivery or damage occurring in transit unless the Buyer makes a claim in writing providing full particulars on both the carriers and the Seller within one week of receipt of Goods or, in the case of non-delivery, within four weeks after the expected arrival of the Goods.
10. Cancellation and Variation
No cancellation or variation of an order by the Buyer shall be effective unless served in writing at the Registered Office of the Seller and until accepted in writing by an authorised officer of the Seller. The Seller reserves the right to refuse to accept such cancellation or variation or to accept cancellation or variation only subject to such conditions as the Seller may determine. Acceptance by the Seller shall be subject to payment by the Buyer of such cancellation or variation charges as the Seller shall deem reasonable. Such charges shall take into account expenses incurred and commitments made by the Seller and all other losses due to such cancellation or variation.
11. Return of the Goods
Where the Goods have been received by the Buyer and the Buyer wishes to return some or all of the Goods, the Seller can in its absolute discretion either:
(i) refuse to accept the return of such Goods and seek payment in accordance with Clause 5 hereof;
or
(ii) accept return of such Goods, subject to such conditions as the Seller may determine and subject to the Seller receiving immediate payment for those Goods not being returned.
12. Force Majeure
Should any event occur whether at the Seller's premises or elsewhere which is beyond the control of the Seller such as by way of example industrial action or dispute (including strike or lock out) shortage of materials, act of God, war, fire, flood, drought, breakdown of machinery, as a result of which the performance of this contract is prevented or delayed:
(a) Without prejudice to its right in the event of breach of contract by the Buyer the Seller reserves the right to cancel delivery or other performance of the Seller's obligations under any contract in whole or in part and in the event of the Seller exercising such right the Seller's liability shall be limited to the repayment to the Buyer (without interest) of any part of the purchase or contract price or charge already received by the Seller and attributed to any unfulfilled and cancelled part of the contract less any expenses incurred by the Seller down to the date of cancellation in part performance of the contract.
(b) If such prevention or delay continues for 60 days the Buyer may elect either to cancel the contract or to allow the order to remain on the books of the Seller and to be completed at some late date at an adjusted price to be determined by the Seller.
13. Replacement of Defective Products
(a) In the event of any defect being discovered in any of the Goods within six months from the date of despatch from the Seller’s works and such defect proved to the satisfaction of the Seller to be due to defective material or workmanship then the Seller shall replace Goods free of charge except for carriage and Customs and other Duties.
(b) The Seller warrants that the Products conform to his specification and, subject as below, indemnifies the Buyer against any loss suffered as a result of the Products failing to conform to such specification.
(c) Other than in respect of claims for death or personal injury caused by the negligence of the Seller, the Seller will not be liable for any of the following losses which may arise by reason of any breach of this Agreement or any implied warranty, condition or other term or any representation or any duty of any kind imposed on the Seller by operation of law:
(i) any loss of anticipated profits or expected future business;
(ii) damage to reputation or goodwill;
(iii) loss of any order or contract;
(iv) any consequential loss of any kind.
(d) Other than in respect of claims for death or personal injury caused by the negligence of the Seller, if any liability attaches to the Seller under clause (13)(b) then the Seller’s total liability in respect of any claim shall not exceed £5 million.
(e) Sub-clause (a) of this Clause 13 shall be subject to the proviso that no guarantees provided by the Seller will apply:
(i) where the Goods have been installed, repaired or alterations made by anyone other than the Seller's representatives or authorised agent; or
(ii) where the Goods have not been installed, commissioned, operated or used in accordance with procedures prescribed by the Seller.
14. Labelling, Packaging and Safety
(a) The Seller will ensure that all products are labelled and packed in accordance with the applicable laws of England and the rules, regulations and directives that apply in that territory, including, but not limited to, those of the European Union and the United Nations Organisation.
(b) The Buyer undertakes to ensure that all product that is re-sold to any person is labelled and packed in the same manner and that any training or instructions necessary for the safe and effective use of the product is provided to any such person and indemnifies the Seller against all and any claims for loss, costs or damage arising from a failure by the Buyer to observe the requirements of this sub clause.
15. Substitutions
In the event of non-availability of materials or parts the Seller reserves the right to use suitable alternative materials or parts where possible. Such substitutes shall be accepted by the Buyer in full satisfaction and performance of the Contract or that part thereof for which it is a substitute as the case may be. In the event that the Seller is unable to obtain a satisfactory substitute its obligations to complete performance of the contract shall upon notification in writing to the Buyer be suspended until such time as the unavailable materials or parts or suitable substitutes become available.
16. Sub-Contracting
The Seller shall be free to employ sub-contractors.
17. Indemnity
The Buyer shall indemnify the Seller against all claims, demands, damages, penalties, costs and expenses arising out of the Seller’s performance of the Contract in accordance with the Buyer’s specifications for which the Seller may become liable by reason of the infringement of any letters patent, registered design, trade mark, copyright (including design copyright) or any other industrial property right.
18. Intellectual Property
The Buyer hereby acknowledges that all intellectual property rights (including but not limited to copyright) in all documents (including drawings) supplied by the Seller to the Buyer shall remain with the Seller. In no circumstances whatsoever shall such documents or their contents be used for any purpose other than that for which they were supplied. The Buyer acknowledges that the trade marks, trade and brand names applied by the Seller to the Goods shall remain the property of the Seller and the Buyer shall acquire no rights in such names. Any intellectual property rights of the Seller shall be used only for the purposes of sale of the Goods.
19. Waiver
No waiver by either party in respect of any breach by the other shall operate as a waiver in respect of any subsequent breach.
20. Severability
Any provisions of these conditions which in any way now or subsequently contravene the law shall be deemed severable and shall not affect any other provisions herein.
21. Governing Law
Any contract of which these conditions form part shall be governed by the laws of England and shall be subject to the exclusive jurisdiction of the English courts.
22. Notices
Any notices required to be served hereunder shall be deemed to be properly served if sent by prepaid Registered or Recorded delivery post to the last known address of the party to be served and shall be deemed to be duly served the day following the date of posting.
23. Clause headings
The clause headings shall not affect the interpretation of these conditions.
ADDENDUM - Terms and Conditions related exclusively to IMD/FIM technical details:
WARNING: Nothing in our technical or commercial communications should be construed to imply or suggest that the user employ operations or create articles, which would infringe any patents belonging to third parties. Specifically, without limitation, using these products to form three dimensional printed or coloured products under certain conditions may infringe one or more of the following patents or their equivalent patents in other jurisdictions:
US 5,108,530
US 5,733,651
US 5,648,414
It is the customer’s responsibility to ensure that its operations, the conditions of processing, and articles of manufacture do not infringe the foregoing patents, or any third party patents. MacDermid does not accept responsibility in this regard. With regard to the foregoing specifically noted patents, if a customer chooses to operate under the conditions claimed in the applicable patent in the applicable jurisdiction it is MacDermid’s understanding that licenses can be obtained from Bayer Aktiengesellschaft. However, obtaining such a license shall be the sole responsibility of the customer, as MacDermid assumes no responsibility for infringement of such patents.
|